These lanterns and detached burner from the lantern on the left
were manufactured by Nagel-Chase, another Chicago company.
This model is unique in having a wooden base rest, here a turned piece of oak.
Neil McRae, restored and ran the gasoline fueled lantern on the left and center.
Henry Plews was able to run his kerosene fueled version of this model (right).
Neil's restoration includes painting to original colors
and painting the originally nickel plated globe cage with a matte chrome finish.
Henry's lantern on the right does not have a white enamel ventilator.

Nagel-Chase showed this No. 4 Model in their catalogs in 1919 & 1920,
and used this same model number for a "stovepipe" lantern as above
several years earlier.
This 300cp kerosene-fueled, single-mantle lantern is in John Anderson's collection.

Another Nagel-Chase lantern, Model 14,
was called the Wizard Gasoline & Kerosene Lantern,
according to the label in the base of the globe cage.
It is in Craig Seabrook's collection.

This Nagel Chase Model 17, in Herman Mulder's collection,
came from the Zwolle, Netherlands fire department, or Zwolle Kazerne in Dutch.
The lantern is marked on the base with a shield and the letters Z K.
The separate pump on this lantern is held by a lower ring and an upper chain
when not in use.
This model also came with a built-in pump.

Another manufacturer that often didn't put any identifying name or numbers
on their lanterns was National Stamping & Electric Works, Chicago, Illinois,
that made the Nulite brand.
This Model 5 Nulite lantern has been restored by Shinzo Kono
and works very well.
Unfortunately the original mica globe is gone.

Neil McRae believes this is a variation of Nulite Model 2M (for match lighting)
that dates to around 1923.
This lantern, in Mike Bullis's collection, has ceramic burner caps,
which are unusal on US lighting products, and a 110 burner.
The air tube is behind the frame support;
the mica globe was removed for this image.

The Nulite Model 18 was apparently made in four different versions -
1 quart (above) and 2 quart (below) founts
as well as with and without (above) an integral pump.
This 300 cp model is torch lighting.
The mica globe is unusual with a brass frame.
This lantern ran well after I restored it.

This Nulite lantern is their Giant, the larger of two Model 18's,
with the two quart fount.
It was possibly sold by Piepgras.
This is in the collection of Craig Seabrook.
It was originally equipped with a mica globe.

Although this lantern has many of the same parts as the Nulite Models above,
it is stamped Acorn Brass Manufacturing Co., Chicago, Illinois,
on the bottom of the fount.
Acorn Brass sold this torch lighting Uni-Lite Model 350 circa 1915.
This 300cp model has a tip cleaner lever as on the Model 18 above.

This unknown model by National Stamping & Elec. Works
in Bob Meyer's collection is instant lighting.
Note that the generator superficially resembles a torch lighting generator
but has a nut at the base of the tube for easy removal.
Bob found that the instant lighting parts
function the same as in an Akron 140BG lamp in his collection.

This is the one mantle Nulite instant lighting version of the above lantern.
The generator and air tube is different from the two mantle version above, in addition to the burner.
When the valve is opened (counterclockwise) the stem moves into the valve body,
an indicator that it is instant lighting (Bob Meyer).
The lantern and globe labeled Storm King (left) are in Roger Haynal's collection.
Roger repainted the steel fount which had lost its chrome plating.
If you have either of these models contact me as we are continuing to study them.

This Nulite lantern has been modified to project a beam of light
and was sold as PeeBee, for Phare Besnard,
by Maris et Besnard, Paris, France.
The interior of the lantern includes a curved reflector.
Note the holder for the external pump, which was manufactured by AGM.
This unusual lantern is in Bo Ryman's collection.

Prentiss Wabers Products Co. in Wisconsin Rapids, Wisconsin,
made this Model L13 lantern
which is one of two models shown in their catalog dated 1934.
This lantern has had the pump handle removed
and a Schrader valve installed for easier pressurizing with a foot pump.
This is common among lanterns used by the Amish.

These single mantle Preway models
 have the characteristic slotted ventilator and winged fuel cap of this brand.
Model L14 (left) for Sears has a combined pump, fuel cap and came with a mica globe.
This model appears in Catalog No. 16 dated 1934.
Model L14A (center) for Montgomery Ward lacks the direction disk on the separate filler cap.
Model L44S (right) for Sears has the same burner as the L14's and a direction disk on the separate filler cap.

Another Junior model, L47PA uses gasoline or kerosene.
This lantern, in Joe Pagan's collection,
has an original Macbeth globe that was made with a hole for lighting.
The lantern also has a well-made two piece reflector
that can also be swung open to broadcast the light.

Preway Model 742-43 with a green painted fount (left)
and 742 43-9 with a nickle plated fount (right); both made for Sears.
These double mantle lanterns have the original mica globes
with a windowed door in the mica globe for lighting.
The lantern on the right is in Joe Pagan's collection.

An unusual lantern design from Prentiss-Wabers Co.,
this Preway Model L46S was also made for Sears and sold as Model 742-461.
 The globe on this model has a hole drilled in it for lighting the mantles.
This lantern is very heavy,
weighing about 7 pounds.